https://community.hpe.com/t5/server-management-remote-server/cpqlodos-and-ilo-errors/m-p/3263166#M452 Thomas,<BR /><BR />The following are from Remote Insight Command Language section of the HP ILO Users Guide. Yoy may need to try<BR /><USER_INFO mode="write"> prior to <ADD_USER segment.=""></ADD_USER><BR />You will also need to add <BR /><RIB_INFO mode="write"> prior to <MOD_NETWORK_SETTINGS>.<BR /><BR />Good Luck!</MOD_NETWORK_SETTINGS></RIB_INFO></USER_INFO> Fri, 30 Apr 2004 12:41:10 GMT Neal Bowman 2004-04-30T12:41:10Z https://community.hpe.com/t5/server-management-remote-server/cpqlodos-and-ilo-errors/m-p/3263165#M451 I have a DL380G3 server and am attempting to configure it utilizing CPQLODOS and Smart Script. I am getting the following error when attempting to configure it:<BR />unable to communicate with the RILOE/RILOE II/iLO<BR /><BR />The odd thing is, however, that it looks like the license key is taken, and it definitely resets the iLO (removes the default username/pword), but it doesn't add the new user information or the IP settings that I want it to have. Any ideas? please find my .rlo file below<BR /><BR /><CPQLODOS version="2.0"><BR /> <ADD_USER></ADD_USER> USER_NAME = "iLO Admin"<BR /> USER_LOGIN = "iloadmin"<BR /> PASSWORD = "xxxxxxx"&gt;<BR /> </CPQLODOS><BR /> <SET_LICENSE><BR /> <LICENSE_KEY value="12345-12345-12345-12345-12345"></LICENSE_KEY><BR /> </SET_LICENSE><BR /> <MOD_NETWORK_SETTINGS><BR /> <SPEED_AUTOSELECT value="No"></SPEED_AUTOSELECT><BR /> <NIC_SPEED value="100"></NIC_SPEED><BR /> <FULL_DUPLEX value="Yes"></FULL_DUPLEX><BR /> <DHCP_ENABLE value="No"></DHCP_ENABLE><BR /> <IP_ADDRESS value="192.168.90.11"></IP_ADDRESS><BR /> <SUBNET_MASK value="255.255.225.0"></SUBNET_MASK><BR /> <GATEWAY_IP_ADDRESS value="192.168.90.1"></GATEWAY_IP_ADDRESS><BR /> <DNS_NAME value="systemname"></DNS_NAME><BR /> </MOD_NETWORK_SETTINGS><BR /> Thu, 29 Apr 2004 11:14:48 GMT https://community.hpe.com/t5/server-management-remote-server/cpqlodos-and-ilo-errors/m-p/3263165#M451 Thomas Sords 2004-04-29T11:14:48Z https://community.hpe.com/t5/server-management-remote-server/cpqlodos-and-ilo-errors/m-p/3263166#M452 Thomas,<BR /><BR />The following are from Remote Insight Command Language section of the HP ILO Users Guide. Yoy may need to try<BR /><USER_INFO mode="write"> prior to <ADD_USER segment.=""></ADD_USER><BR />You will also need to add <BR /><RIB_INFO mode="write"> prior to <MOD_NETWORK_SETTINGS>.<BR /><BR />Good Luck!</MOD_NETWORK_SETTINGS></RIB_INFO></USER_INFO> Fri, 30 Apr 2004 12:41:10 GMT https://community.hpe.com/t5/server-management-remote-server/cpqlodos-and-ilo-errors/m-p/3263166#M452 Neal Bowman 2004-04-30T12:41:10Z https://community.hpe.com/t5/server-management-remote-server/cpqlodos-and-ilo-errors/m-p/3263167#M453 The <RIB_INFO mode="write"> seems to only be valid if you are using the CPQLOCFG utility, not with the CPQLODOS utility. Good idea though. Any others?</RIB_INFO> Mon, 03 May 2004 06:37:04 GMT https://community.hpe.com/t5/server-management-remote-server/cpqlodos-and-ilo-errors/m-p/3263167#M453 Thomas Sords 2004-05-03T06:37:04Z