https://community.hpe.com/t5/server-management-remote-server/ilo-newbie/m-p/4486630#M4579 If you have the old dongle the IP address to connect to is 192.168.1.1<BR /><BR />If you have the new dongle, connect up a screen and reboot, you should see the IP address appear as part of the boot process. Wed, 26 Aug 2009 21:16:29 GMT Adrian Clint 2009-08-26T21:16:29Z https://community.hpe.com/t5/server-management-remote-server/ilo-newbie/m-p/4486629#M4578 Not a sysadmin by trade - but I need to wipe a rack of bl25p blades. I've got the cable for connecting to the blade, but not sure how to get the ip address for iLO...? Hoping to use virtual media to boot a copy of Linux and then use "dd" to wipe the drives. Wed, 26 Aug 2009 17:10:30 GMT https://community.hpe.com/t5/server-management-remote-server/ilo-newbie/m-p/4486629#M4578 whjpf 2009-08-26T17:10:30Z https://community.hpe.com/t5/server-management-remote-server/ilo-newbie/m-p/4486630#M4579 If you have the old dongle the IP address to connect to is 192.168.1.1<BR /><BR />If you have the new dongle, connect up a screen and reboot, you should see the IP address appear as part of the boot process. Wed, 26 Aug 2009 21:16:29 GMT https://community.hpe.com/t5/server-management-remote-server/ilo-newbie/m-p/4486630#M4579 Adrian Clint 2009-08-26T21:16:29Z https://community.hpe.com/t5/server-management-remote-server/ilo-newbie/m-p/4486631#M4580 That worked. iLO made this very easy - Thank you! Thu, 27 Aug 2009 14:50:46 GMT https://community.hpe.com/t5/server-management-remote-server/ilo-newbie/m-p/4486631#M4580 whjpf 2009-08-27T14:50:46Z