https://community.hpe.com/t5/server-management-remote-server/dl140-g2-ilo-password-problem/m-p/4522755#M4723 hi, a have a problem with DL140G2 remote connection. default "User=admin" and "Pass=admin" doesnt work.the problem is the same to other server which the system board was replaced with a newone.i was update firmware on IPMI,because i read somewhere when you update firmware the "user" and "pass" will be "default", but without any result. what can i do, to resolve the problem.<BR /><BR />thanks in advance Wed, 28 Oct 2009 08:57:13 GMT julydimitrov 2009-10-28T08:57:13Z https://community.hpe.com/t5/server-management-remote-server/dl140-g2-ilo-password-problem/m-p/4522755#M4723 hi, a have a problem with DL140G2 remote connection. default "User=admin" and "Pass=admin" doesnt work.the problem is the same to other server which the system board was replaced with a newone.i was update firmware on IPMI,because i read somewhere when you update firmware the "user" and "pass" will be "default", but without any result. what can i do, to resolve the problem.<BR /><BR />thanks in advance Wed, 28 Oct 2009 08:57:13 GMT https://community.hpe.com/t5/server-management-remote-server/dl140-g2-ilo-password-problem/m-p/4522755#M4723 julydimitrov 2009-10-28T08:57:13Z