https://community.hpe.com/t5/server-management-remote-server/enable-ilo-without-reboot-amp-how-to-tell-if-ilo-enabled/m-p/4562127#M4809 Is this a Windows server? If so you can check Device Manager and look at the Multifunction Adapter section for the iLO proc.<BR /><BR />Does HPONCFG report that no ilo card was found? Mon, 18 Jan 2010 21:22:52 GMT WFHC-WI 2010-01-18T21:22:52Z https://community.hpe.com/t5/server-management-remote-server/enable-ilo-without-reboot-amp-how-to-tell-if-ilo-enabled/m-p/4562126#M4808 I have some servers that we can;t reboot and we need ILO enabled.<BR /><BR />I've run hponcfg to program the cards and they still don't work.<BR /><BR />I suspect that ILO may be disabled but how can I determine that?<BR /><BR />When I look on the HP management home page, I don;t see anything that says ILO is disabled. There are a couple of items for the management processor:<BR /><BR />Integrated Lights-Out = shows icon = green check<BR /><BR />Embedded NEC98431 = shows icon= blue ?, status = enabled, link status = unknown<BR /><BR />thanks Mon, 11 Jan 2010 16:01:35 GMT https://community.hpe.com/t5/server-management-remote-server/enable-ilo-without-reboot-amp-how-to-tell-if-ilo-enabled/m-p/4562126#M4808 first_1 2010-01-11T16:01:35Z https://community.hpe.com/t5/server-management-remote-server/enable-ilo-without-reboot-amp-how-to-tell-if-ilo-enabled/m-p/4562127#M4809 Is this a Windows server? If so you can check Device Manager and look at the Multifunction Adapter section for the iLO proc.<BR /><BR />Does HPONCFG report that no ilo card was found? Mon, 18 Jan 2010 21:22:52 GMT https://community.hpe.com/t5/server-management-remote-server/enable-ilo-without-reboot-amp-how-to-tell-if-ilo-enabled/m-p/4562127#M4809 WFHC-WI 2010-01-18T21:22:52Z