https://community.hpe.com/t5/server-management-remote-server/ilo-on-ml115-g5-with-freebsd/m-p/4591665#M4865 If the bios version of ML115 is jul 09 then the version firmware of ilo must be 3.11<BR /><BR />In <A href="http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01325507/c01325507.pdf" target="_blank">http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01325507/c01325507.pdf</A><BR />are the instructions for remotely updating the ilo firmware with server off. Thu, 22 Apr 2010 22:58:50 GMT Lima Alpha 2010-04-22T22:58:50Z https://community.hpe.com/t5/server-management-remote-server/ilo-on-ml115-g5-with-freebsd/m-p/4591664#M4864 Hi,<BR /><BR />I have a ML115 G5 running FreeBSD, but as soon as I install a ILO (HP ProLiant 100 G5 Lights-Out 100c) in the server, It's not starting up, but failing with the error:<BR />Rear fan not running - shutting down.<BR /><BR />And just for the record: The rear fan are running<BR /><BR />I have tried changing the ILO-card and the server, but it's the same.<BR /><BR />Any suggestions Fri, 26 Feb 2010 14:01:58 GMT https://community.hpe.com/t5/server-management-remote-server/ilo-on-ml115-g5-with-freebsd/m-p/4591664#M4864 Jan Becher 2010-02-26T14:01:58Z https://community.hpe.com/t5/server-management-remote-server/ilo-on-ml115-g5-with-freebsd/m-p/4591665#M4865 If the bios version of ML115 is jul 09 then the version firmware of ilo must be 3.11<BR /><BR />In <A href="http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01325507/c01325507.pdf" target="_blank">http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01325507/c01325507.pdf</A><BR />are the instructions for remotely updating the ilo firmware with server off. Thu, 22 Apr 2010 22:58:50 GMT https://community.hpe.com/t5/server-management-remote-server/ilo-on-ml115-g5-with-freebsd/m-p/4591665#M4865 Lima Alpha 2010-04-22T22:58:50Z