https://community.hpe.com/t5/server-management-remote-server/snmp-via-ilo/m-p/4651947#M5058 <!--!*#-->Hello, I have several HP Proliant servers with VMware ESXi installed. I want to monitor the hardware of de Proliant server with SNMP OID commands. We use a legacy Proactive Monitoring tool through which we can issue SNMP get commands. Is there w way I can monitor the hardware through the iLO board. When I lgin to the iLo interface there is only a setting for sending SNMP traps. I already found that the iLO doesn't have a snmp stack.<BR /><BR />Is there another way through which I can monitor the hardware.<BR /><BR />Regards,<BR /><BR />JanP. Wed, 23 Jun 2010 12:42:42 GMT Jan Pultrum 2010-06-23T12:42:42Z https://community.hpe.com/t5/server-management-remote-server/snmp-via-ilo/m-p/4651947#M5058 <!--!*#-->Hello, I have several HP Proliant servers with VMware ESXi installed. I want to monitor the hardware of de Proliant server with SNMP OID commands. We use a legacy Proactive Monitoring tool through which we can issue SNMP get commands. Is there w way I can monitor the hardware through the iLO board. When I lgin to the iLo interface there is only a setting for sending SNMP traps. I already found that the iLO doesn't have a snmp stack.<BR /><BR />Is there another way through which I can monitor the hardware.<BR /><BR />Regards,<BR /><BR />JanP. Wed, 23 Jun 2010 12:42:42 GMT https://community.hpe.com/t5/server-management-remote-server/snmp-via-ilo/m-p/4651947#M5058 Jan Pultrum 2010-06-23T12:42:42Z