https://community.hpe.com/t5/server-management-remote-server/ilo-doesn-t-find-enclosure/m-p/4733514#M5579 What iLO2 firmware version do you have?<BR /><BR />p-Class is no longer supported in iLO2 versions 2.xx. If you flashed them with 2.xx, you will have to go back to iLO2 1.82<BR /><BR /> Tue, 04 Jan 2011 14:51:28 GMT Oscar A. Perez 2011-01-04T14:51:28Z https://community.hpe.com/t5/server-management-remote-server/ilo-doesn-t-find-enclosure/m-p/4733513#M5578 Everything was working fine, but suddenly some iLOs (of p-Class servers) tell me: "Server is not in a managed enclosure". And in SIM Identify System task I get the message: "The discovered blade is not in an enclosure".<BR /><BR />The strange thing: some of the servers in the same enclosure have no problem, all management agents (incl. Rack Infrastructure Service) are running.<BR /><BR />Any ideas? Tue, 04 Jan 2011 11:37:54 GMT https://community.hpe.com/t5/server-management-remote-server/ilo-doesn-t-find-enclosure/m-p/4733513#M5578 Günther Schmied 2011-01-04T11:37:54Z https://community.hpe.com/t5/server-management-remote-server/ilo-doesn-t-find-enclosure/m-p/4733514#M5579 What iLO2 firmware version do you have?<BR /><BR />p-Class is no longer supported in iLO2 versions 2.xx. If you flashed them with 2.xx, you will have to go back to iLO2 1.82<BR /><BR /> Tue, 04 Jan 2011 14:51:28 GMT https://community.hpe.com/t5/server-management-remote-server/ilo-doesn-t-find-enclosure/m-p/4733514#M5579 Oscar A. Perez 2011-01-04T14:51:28Z https://community.hpe.com/t5/server-management-remote-server/ilo-doesn-t-find-enclosure/m-p/4733515#M5580 Going back to 1.82 solved the issue.<BR /><BR />I checked the Release Notes (or better Component Details in VCRM - probably the same) and didn't find anything about this problem, only a list of enhancements and fixes.<BR /><BR />Thank you. Tue, 04 Jan 2011 16:30:17 GMT https://community.hpe.com/t5/server-management-remote-server/ilo-doesn-t-find-enclosure/m-p/4733515#M5580 Günther Schmied 2011-01-04T16:30:17Z