https://community.hpe.com/t5/server-management-remote-server/cpqlocfg-errors/m-p/3327001#M577 Configuring the "RILOE" class cards will work with cpqlocfg.exe but the scripts available are not always compliant. In your case, the utility is trying to CONFIG_ILO_PRIV which does not exist as a possible configuration parameter so the script errors out. If you remove comment this line out, that should correct the problem. Here is a sample script I use to configure RILOE's:<BR /><BR /><BR /><RIBCL version="2.0"><BR /> <LOGIN user_login="LoginID" password="Password"><BR /> <USER_INFO mode="write"><BR /> <ADD_USER></ADD_USER> USER_NAME ="Username"<BR /> USER_LOGIN ="Username"<BR /> PASSWORD ="Password"&gt;<BR /> <ADMIN_PRIV value="Yes"></ADMIN_PRIV><BR /> <CONFIG_RILO_PRIV value="Yes"></CONFIG_RILO_PRIV><BR /> <LOGIN_PRIV value="Yes"></LOGIN_PRIV><BR /> <REMOTE_CONS_PRIV value="Yes"></REMOTE_CONS_PRIV><BR /> <RESET_SERVER_PRIV value="Yes"></RESET_SERVER_PRIV><BR /> <VIRTUAL_MEDIA_PRIV value="Yes"></VIRTUAL_MEDIA_PRIV><BR /><!-- <CLIENT_RANGE value="1.1.1.1-223.255.255.255"/> --> <BR /> </USER_INFO><BR /> </LOGIN><BR /> </RIBCL><BR /><BR /> Mon, 12 Jul 2004 08:42:44 GMT Chuck Reimer 2004-07-12T08:42:44Z https://community.hpe.com/t5/server-management-remote-server/cpqlocfg-errors/m-p/3327000#M576 I'm getting the following error when I try to add a user account to some of my RILO Is:<BR /><BR />MESSAGE='Syntax error: Line #8: syntax error near "&lt;" in the line: "&lt; CONFIG_ILO_PRIV value = "Yes" /&gt;"'<BR /><BR />All of these RILOs have v 2.53 firmware. Does adding user accounts not work on RILO Is with CPQLOCFG? Thu, 08 Jul 2004 20:05:31 GMT https://community.hpe.com/t5/server-management-remote-server/cpqlocfg-errors/m-p/3327000#M576 Brian Weck 2004-07-08T20:05:31Z https://community.hpe.com/t5/server-management-remote-server/cpqlocfg-errors/m-p/3327001#M577 Configuring the "RILOE" class cards will work with cpqlocfg.exe but the scripts available are not always compliant. In your case, the utility is trying to CONFIG_ILO_PRIV which does not exist as a possible configuration parameter so the script errors out. If you remove comment this line out, that should correct the problem. Here is a sample script I use to configure RILOE's:<BR /><BR /><BR /><RIBCL version="2.0"><BR /> <LOGIN user_login="LoginID" password="Password"><BR /> <USER_INFO mode="write"><BR /> <ADD_USER></ADD_USER> USER_NAME ="Username"<BR /> USER_LOGIN ="Username"<BR /> PASSWORD ="Password"&gt;<BR /> <ADMIN_PRIV value="Yes"></ADMIN_PRIV><BR /> <CONFIG_RILO_PRIV value="Yes"></CONFIG_RILO_PRIV><BR /> <LOGIN_PRIV value="Yes"></LOGIN_PRIV><BR /> <REMOTE_CONS_PRIV value="Yes"></REMOTE_CONS_PRIV><BR /> <RESET_SERVER_PRIV value="Yes"></RESET_SERVER_PRIV><BR /> <VIRTUAL_MEDIA_PRIV value="Yes"></VIRTUAL_MEDIA_PRIV><BR /><!-- <CLIENT_RANGE value="1.1.1.1-223.255.255.255"/> --> <BR /> </USER_INFO><BR /> </LOGIN><BR /> </RIBCL><BR /><BR /> Mon, 12 Jul 2004 08:42:44 GMT https://community.hpe.com/t5/server-management-remote-server/cpqlocfg-errors/m-p/3327001#M577 Chuck Reimer 2004-07-12T08:42:44Z