https://community.hpe.com/t5/server-management-remote-server/about-ipmi-on-ilo3/m-p/4792132#M5846 Can iLO3 support use IPMI "out of band" commands to get mainboard integration NIC information(such as NIC physical address information) ? How to use the command?<BR /><BR />This command is ok? And how to define the hex parameters of the RAW command? <BR />C:&gt;ipmitool.exe -I lanplus -H xx.xx.xx.xx -U root -P rootroot raw 0x30 0x90 0x01 0x00 0x01<BR /><BR />Thanks a million! Wed, 25 May 2011 15:37:53 GMT Salmon Wang 2011-05-25T15:37:53Z https://community.hpe.com/t5/server-management-remote-server/about-ipmi-on-ilo3/m-p/4792132#M5846 Can iLO3 support use IPMI "out of band" commands to get mainboard integration NIC information(such as NIC physical address information) ? How to use the command?<BR /><BR />This command is ok? And how to define the hex parameters of the RAW command? <BR />C:&gt;ipmitool.exe -I lanplus -H xx.xx.xx.xx -U root -P rootroot raw 0x30 0x90 0x01 0x00 0x01<BR /><BR />Thanks a million! Wed, 25 May 2011 15:37:53 GMT https://community.hpe.com/t5/server-management-remote-server/about-ipmi-on-ilo3/m-p/4792132#M5846 Salmon Wang 2011-05-25T15:37:53Z https://community.hpe.com/t5/server-management-remote-server/about-ipmi-on-ilo3/m-p/4792133#M5847 Anybody can help this problem? Thanks! Sat, 28 May 2011 06:33:11 GMT https://community.hpe.com/t5/server-management-remote-server/about-ipmi-on-ilo3/m-p/4792133#M5847 Salmon Wang 2011-05-28T06:33:11Z