topic Smash CLP configuration of SSO Certificate in Server Management - Remote Server Management

Smash CLP configuration of SSO Certificate

AntsInPants — Fri, 10 Jun 2011 07:29:51 GMT

Hi,

I am trying to configure a DL 380 G7 through SSH access to trust my HP SIM server with a Certificate. The ILO Scripting manual for v3 fw 1.20 states that

To dynamically import a certificate from the specified server (hpsim2.corp.net):
hpiLO-> load = hpsim2.corp.net

However, with my experiment and looking at the LOAD command help output it is quite clear that this command can only be used to Download a new Firmware .bin file over HTTP/HTTPS protocol.

I am ofcourse in the correct target (/map1/oemhp_ssocfg1/) when trying it out.
Is there an error in the manuals or am I using it incorrectly?

Any tips are welcome,
Antti

Re: Smash CLP configuration of SSO Certificate

Oscar A. Perez — Fri, 10 Jun 2011 13:12:02 GMT

It doesn't seem to work. Can you use the webGUI to set the the SSO and import the certificate instead?

Re: Smash CLP configuration of SSO Certificate

AntsInPants — Mon, 13 Jun 2011 05:00:11 GMT

Hi,

yes the web gui is working as expected but is not how I want to configure multiple machines. Any other mass deployment methods would also be welcome?

Re: Smash CLP configuration of SSO Certificate

Oscar A. Perez — Mon, 13 Jun 2011 12:24:10 GMT

Yes, you can use XML scripts

Windows
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?swItem=MTX-4b72daed6e554cefad65364462

Linux
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?swItem=MTX-9ded60bd746942e18651211f51

Scripting Guide
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02774508/c02774508.pdf