topic Re: Using ILO scripting to setup multiple servers? in Server Management - Remote Server Management https://community.hpe.com/t5/server-management-remote-server/using-ilo-scripting-to-setup-multiple-servers/m-p/3341255#M611 You can use this script to sync up the password with hponcfg. Run hponcfg on the local server. Then you can use HPSIM/Insight Manager or cpqlocfg batch file to set up your iLO/RILOE environment.<BR /><BR /><RIBCL version="2.0"><BR /> <LOGIN user_login="admin" password="admin123"><BR /> <USER_INFO mode="write"><BR /> <MOD_USER user_login="Administrator"><BR /> <PASSWORD value="password"></PASSWORD><BR /> </MOD_USER><BR /> </USER_INFO><BR /> </LOGIN><BR /></RIBCL><BR /> Tue, 27 Jul 2004 17:51:39 GMT barnett chan 2004-07-27T17:51:39Z Using ILO scripting to setup multiple servers? https://community.hpe.com/t5/server-management-remote-server/using-ilo-scripting-to-setup-multiple-servers/m-p/3341254#M610 I've figured out how to use the scripts for individual servers, but now I want to figure out how to use these scripts so I can set up every ILO/RILO in the environment with the same user/pass and general settings at once.<BR />I'm not finding any easy information on how to do this, so I am asking here.<BR /><BR />Anyone have any suggestions on where to look, or perhaps know how to do this off the top of their head? Mon, 26 Jul 2004 11:28:31 GMT https://community.hpe.com/t5/server-management-remote-server/using-ilo-scripting-to-setup-multiple-servers/m-p/3341254#M610 Chris_557 2004-07-26T11:28:31Z Re: Using ILO scripting to setup multiple servers? https://community.hpe.com/t5/server-management-remote-server/using-ilo-scripting-to-setup-multiple-servers/m-p/3341255#M611 You can use this script to sync up the password with hponcfg. Run hponcfg on the local server. Then you can use HPSIM/Insight Manager or cpqlocfg batch file to set up your iLO/RILOE environment.<BR /><BR /><RIBCL version="2.0"><BR /> <LOGIN user_login="admin" password="admin123"><BR /> <USER_INFO mode="write"><BR /> <MOD_USER user_login="Administrator"><BR /> <PASSWORD value="password"></PASSWORD><BR /> </MOD_USER><BR /> </USER_INFO><BR /> </LOGIN><BR /></RIBCL><BR /> Tue, 27 Jul 2004 17:51:39 GMT https://community.hpe.com/t5/server-management-remote-server/using-ilo-scripting-to-setup-multiple-servers/m-p/3341255#M611 barnett chan 2004-07-27T17:51:39Z