https://community.hpe.com/t5/server-management-remote-server/cpqlocfg-error/m-p/3343951#M614 Cpqlocfg utility should use the iP or DNS name of the Lights Out device (RILOE/iLO), and not the ip of the server. Mon, 02 Aug 2004 11:59:18 GMT barnett chan 2004-08-02T11:59:18Z https://community.hpe.com/t5/server-management-remote-server/cpqlocfg-error/m-p/3343950#M613 I am getting the following error when I try to change some network settings:<BR /><BR />IP Address is: <MY server="" name=""><BR />cpqlocfg: ERROR: SSL_write:Connection Terminated:reason(0).<BR /><BR />Is it necessary to have a network connection to the RIB itself to do this? I was able yo update the firmware using the XML script, but I specified the IP address of the server, not the name or IP address of the RIB itself. I had a network connection to the RIB on that occasion.</MY> Wed, 28 Jul 2004 19:22:41 GMT https://community.hpe.com/t5/server-management-remote-server/cpqlocfg-error/m-p/3343950#M613 Karl Sarkozi 2004-07-28T19:22:41Z https://community.hpe.com/t5/server-management-remote-server/cpqlocfg-error/m-p/3343951#M614 Cpqlocfg utility should use the iP or DNS name of the Lights Out device (RILOE/iLO), and not the ip of the server. Mon, 02 Aug 2004 11:59:18 GMT https://community.hpe.com/t5/server-management-remote-server/cpqlocfg-error/m-p/3343951#M614 barnett chan 2004-08-02T11:59:18Z