topic Re: SIM 7 and iLo in Server Management - Remote Server Management

SIM 7 and iLo

Robert Styles — Tue, 10 Aug 2004 09:24:06 GMT

Trying to get the MP in SIM 7 to show more than the question mark (?). Had everything set fine when it was CIM 4.x... just looking for the little secret to get a nice green check here.

Re: SIM 7 and iLo

Terry Auspitz — Tue, 10 Aug 2004 10:02:46 GMT

I'm not sure I understand your question. Are you referring to Compaq Insight Manager 7 (CIM 7) HP Systems Insight Manager 4 (SIM 4)? There is no SIM 7 so I'm not sure tow hich product you are referring.

-Terry

Re: SIM 7 and iLo

Robert Styles — Tue, 10 Aug 2004 10:08:21 GMT

Yeah, sorry, SIM 4.1 upgraded from CIM 7.

Re: SIM 7 and iLo

David Claypool — Tue, 10 Aug 2004 10:15:06 GMT

This information applies to Insight Manager 7 (all versions) and HP Systems Insight Manager (all versions).

First, you have to make sure that all of your iLOs have been discovered. Check the "All Management Processors" query or list to determine if you have all of them in the database.

When HP SIM or IM7 do a device identification with an iLO, it queries for an XML response from the iLO. Among other things, the serial number of the host server is retrieved. It is that information that is used to make the association. Device identification is automatically run when a device is newly discovered and by default a "Daily Device Identification" is run to incorporate any changes.

iLO has a "SNMP/Insight Manager Settings" page under the "Administration" tab. Best results are obtained when set to "high."

Problems can occur if a motherboard replacement has been made and the tech did not enter the system's serial number in RBSU, making the S/N blank, and thereby screwing up the association.

Re: SIM 7 and iLo

Robert Styles — Tue, 10 Aug 2004 15:20:24 GMT

Well... it seems that with CIM you needed the SNMP community set to R/W... NOW you need to have it set to R/C.

Lot's of green now... Thanks!