ILO Network_setting trouble

NacJ — Thu, 04 Oct 2007 14:33:42 GMT

I'm Traying to use HPoncfg to bring back my ILO network interface
Here is the command line I performed and the result:
C:\ILO Tools>hponcfg /f Mod_Network_settings.xml /l log.txt
No RILOE II board found.
Firmware Revision = 1.840000 Device type = ILO Driver name = cpqci
Script succeeded

And the here is my script mod_network_settings.xml:

So after doing this the interface still not responding, when I performed a ping 174.19.0.18, and the changes were not made even if everythig seems to be OK in log file:

Log.txt:

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>
Scripting utility should be updated to the latest version.

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

STATUS="0x0000"
MESSAGE='No error'
/>

Do you have any ideas why the changes were not made?
Thank you

Re: ILO Network_setting trouble

Oscar A. Perez — Fri, 05 Oct 2007 08:41:01 GMT

You still have DHCP enabled for IP and Gateway. Change those lines to:

Re: ILO Network_setting trouble

NacJ — Fri, 05 Oct 2007 10:50:44 GMT

Yes it Works.
Thak you so much.

Re: ILO Network_setting trouble

NacJ — Fri, 05 Oct 2007 11:01:46 GMT

Solution found

topic Re: ILO Network_setting trouble in Server Management - Remote Server Management

ILO Network_setting trouble

Re: ILO Network_setting trouble

Re: ILO Network_setting trouble

Re: ILO Network_setting trouble