https://community.hpe.com/t5/server-management-remote-server/configuring-ilo-on-bl20p-through-diagnostics-port/m-p/5150273#M6605 There is an IP address on the dongle and you connect with a straight through RJ45 cable. You must configure your network to be on the same range and subnet.<BR /><BR />Thanks. Wed, 14 Jan 2009 04:50:43 GMT Radiohead316 2009-01-14T04:50:43Z https://community.hpe.com/t5/server-management-remote-server/configuring-ilo-on-bl20p-through-diagnostics-port/m-p/5150272#M6604 Hello,<BR /><BR />I have a BL20p G2 that I need to configure the ILO on locally. I have received the diagnostics cable to connect to the server, but I'm not sure exactly what to do from here.<BR /><BR />Do I connect through the serial or network port? What are the steps to configure the IP's?<BR /><BR />Thanks. Tue, 13 Jan 2009 18:11:43 GMT https://community.hpe.com/t5/server-management-remote-server/configuring-ilo-on-bl20p-through-diagnostics-port/m-p/5150272#M6604 Radiohead316 2009-01-13T18:11:43Z https://community.hpe.com/t5/server-management-remote-server/configuring-ilo-on-bl20p-through-diagnostics-port/m-p/5150273#M6605 There is an IP address on the dongle and you connect with a straight through RJ45 cable. You must configure your network to be on the same range and subnet.<BR /><BR />Thanks. Wed, 14 Jan 2009 04:50:43 GMT https://community.hpe.com/t5/server-management-remote-server/configuring-ilo-on-bl20p-through-diagnostics-port/m-p/5150273#M6605 Radiohead316 2009-01-14T04:50:43Z