https://community.hpe.com/t5/server-management-remote-server/bl20p-ilo-login/m-p/5249780#M6759 The Default Username is "Administrator" there is no default password. I believe it is listed on a tag on the side of the blade. If the Administrator password has been changed from the factory setting on the tag, then you will need to open the server and change a switch on the Motherboard to disable the security. then you can reset it. Tue, 03 Aug 2010 12:48:46 GMT Martin Smoral 2010-08-03T12:48:46Z https://community.hpe.com/t5/server-management-remote-server/bl20p-ilo-login/m-p/5249779#M6758 What is the default user name and password when connecting to ilo using dongle 2704655-001 on BL20p blade (going to 192.168.1.1)? Mon, 02 Aug 2010 01:16:49 GMT https://community.hpe.com/t5/server-management-remote-server/bl20p-ilo-login/m-p/5249779#M6758 Dariusz Stochmal 2010-08-02T01:16:49Z https://community.hpe.com/t5/server-management-remote-server/bl20p-ilo-login/m-p/5249780#M6759 The Default Username is "Administrator" there is no default password. I believe it is listed on a tag on the side of the blade. If the Administrator password has been changed from the factory setting on the tag, then you will need to open the server and change a switch on the Motherboard to disable the security. then you can reset it. Tue, 03 Aug 2010 12:48:46 GMT https://community.hpe.com/t5/server-management-remote-server/bl20p-ilo-login/m-p/5249780#M6759 Martin Smoral 2010-08-03T12:48:46Z https://community.hpe.com/t5/server-management-remote-server/bl20p-ilo-login/m-p/5249781#M6760 Ok thanks. Tue, 03 Aug 2010 12:54:22 GMT https://community.hpe.com/t5/server-management-remote-server/bl20p-ilo-login/m-p/5249781#M6760 Dariusz Stochmal 2010-08-03T12:54:22Z https://community.hpe.com/t5/server-management-remote-server/bl20p-ilo-login/m-p/5249782#M6761 The Default Username is "Administrator" there is no default password. I believe it is listed on a tag on the side of the blade. If the Administrator password has been changed from the factory setting on the tag, then you will need to open the server and change a switch on the Motherboard to disable the security. then you can reset it. Tue, 03 Aug 2010 12:55:31 GMT https://community.hpe.com/t5/server-management-remote-server/bl20p-ilo-login/m-p/5249782#M6761 Dariusz Stochmal 2010-08-03T12:55:31Z