Find out iLO version remotely

Sandndan — Wed, 31 Jul 2013 14:32:00 GMT

Hey guys,

is there a possibilty to check out the iLO version remotly, e.g. by cmd / vb / ps ?

I found a xml to setup network setting (see attached file), but there is on line for sntp settings, which is only for iLO 3 and iLO 4.

We are using iLO 1 and iLO 2 , too.

We configure iLO for each server with a VB program. It overwrites the needed xml files with special data depending on the severlocation. Before it runs the xml files, it should figure out whether it is iLO 3+ or less.

The mod_network.xml we use to configure DNS server for iLO. Now we want to configure sntp server too. So i found this line in the xml file:

<DHCP_SNTP_SETTINGS value="Yes"/>
            <SNTP_SERVER1 value="0.0.0.0"/>
            <SNTP_SERVER2 value="0.0.0.0"/>
            <TIMEZONE value="America/Anchorage"/>

I guess, If I use this for iLO 1 and iLO2, I will get an error, won't I?

Is this possible? Can I check the iLO version via script?

Thanks a lot

Danny Sandner

Re: Find out iLO version remotely

Oscar A. Perez — Wed, 31 Jul 2013 14:31:34 GMT

You can scan your network using the following URL and parse the XML reply you'd get if you happen to find an iLO.

http://<IP-Address>/xmldata?item=all

Re: Find out iLO version remotely

Sandndan — Wed, 31 Jul 2013 14:42:03 GMT

Thanks. It works. I think that will be fine and I can use this.

topic Re: Find out iLO version remotely in Server Management - Remote Server Management

Find out iLO version remotely

Re: Find out iLO version remotely

Re: Find out iLO version remotely