topic Re: cannot install ilo online configuration utilitiy gui for ml150 g6 in Server Management - Remote Server Management

cannot install ilo online configuration utilitiy gui for ml150 g6

gdrummer — Mon, 11 Apr 2016 21:29:39 GMT

Before I start, this server is on a remote site in which I will never physically touch. i.e. cannot reboot and go in iLO boot options to change IPs...

I cannot find the right driver to install the ilo management on - http://h20566.www2.hpe.com/hpsc/swd/public/readIndex?sp4ts.oid=3884326&swLangOid=8&swEnvOid=4064

I have tried the normal driver I use for 2008 r2 64x, but no dice. http://h20564.www2.hpe.com/hpsc/swd/public/detail?swItemId=MTX_7ce673c901e841599eb31e3372#tab3

SMH shows Lights Out 100 w/an IP configured when this server went in initially, but I need to change the IP as it's a different scheme...

Any ideas?

Re: cannot install ilo online configuration utilitiy gui for ml150 g6

Jimmy Vance — Tue, 12 Apr 2016 03:38:31 GMT

Lights-out 100 (LO100) is not the same BMC as iLO. iLO tools will not work on LO100

Re: cannot install ilo online configuration utilitiy gui for ml150 g6

gdrummer — Wed, 13 Apr 2016 14:39:13 GMT

Hi Jimmy,

Thanks. So the only way to configure this is in the menu before the system POSTs?

I'm still sorta new to iLO configuration. What do you mean by BMC? Do you have any articles on what you are saying or how to know if it will/won't work? I never knew this...

Re: cannot install ilo online configuration utilitiy gui for ml150 g6

Jimmy Vance — Wed, 13 Apr 2016 17:43:02 GMT

BMC = Baseband Management Controller. Some of the older entry level servers had LO100 for management, it is not the same as iLO.

Re: cannot install ilo online configuration utilitiy gui for ml150 g6

gdrummer — Wed, 13 Apr 2016 18:34:34 GMT

Oh, gotcha. Thanks for the info.