topic Re: PS-cmdlets without iLo-Reset in Server Management - Remote Server Management

PS-cmdlets without iLo-Reset

Marcel_D — Thu, 07 Feb 2019 14:41:18 GMT

Hi,

I'm trying to realize a complete iLo-Configuration with Powershell-cmdlets (HPEiLoCmdLets; 2.1.0.0) It seems that after every "set-hpeilo...", the iLo is Resetting. Is there a way to supress this behavior, until the Script ran through and do a Reset at the End? Otherwise, this will take a long time until it's done.

Samle:

Set-HPEiLOAccessSetting ...

Set-HPEiLOSNTPSetting ...

Set-HPEiLOEncryptionSetting ...

Set-HPEiLODirectorySetting ...

Re: PS-cmdlets without iLo-Reset

Hema_H — Mon, 11 Feb 2019 09:08:53 GMT

Hi Marcel,

The cmdlets uses RIBCL and Redfish interfaces for iLO4 and iLO5 respectively for communication. It is the RIBCL interface that does the reset after the changes are made and Redfish returns a message "ResetRequired" in which case you will be able to reset the iLO after all the settings are made using the cmdlet Reset-HPEiLO -Device iLO. So there is no way to supress this behaviour from the cmdlets in iLO4.

Thanks,

Hema

Re: PS-cmdlets without iLo-Reset

ronissac — Wed, 13 Feb 2019 05:40:58 GMT

Hi ,

This is as per design , hence not possible to supress this behaviour.

Regards

Ronny