topic Re: How to Configure SNMP Alert on iLO4 Servers. in Server Management - Remote Server Management

How to Configure SNMP Alert on iLO4 Servers.

Santy23 — Mon, 15 Apr 2019 09:20:00 GMT

We are looking for setting up SNMP alerting on our HP iLO4 servers.
Reason behind this is we need to be made aware if there is a failure in the ILO or any of the hardware components on the OS HW side or the ILO HW side through incident tickets.
iLO OS is Microsoft Windows 2012 Standard
Firmware iLO Version 2.54

Queries
1) From where i will get the SNMP MIB File Copy.
2) If iLO4 server using Microsoft Windows 2012 Standard as Operating Systems then is there any SNMP MIB file available.
3) How to Confirue SNMP Alerts on iLO4 Server.

4) If anyone have the copy of SNMP MIB File Could you please forward me.

Re: How to Configure SNMP Alert on iLO4 Servers.

Jimmy Vance — Mon, 15 Apr 2019 15:23:50 GMT

You can find all the iLO4 documenttion here, look under the configuration section for SNMP configuration
https://support.hpe.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-a00043732en_us

The MIB files can be found here
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c04272529

Re: How to Configure SNMP Alert on iLO4 Servers.

Santy23 — Mon, 15 Apr 2019 15:59:43 GMT

Thanks for your reply Jimmy,

I have small confusion about MIB file, which MIB file should we go for if we have below iLO Configuration

iLO OS is running on Microsoft Windows 2012 Standard
Firmware iLO Version 2.54

Which MIB Kit Version need to access and download MIB Content for MS Windows ?