topic Re: iLO Powershell Cmdlets ver 2.2.0.0 & Update-HPEILOFirmware prompting in Server Management - Remote Server Management

iLO Powershell Cmdlets ver 2.2.0.0 & Update-HPEILOFirmware prompting

Steve_Tippett — Tue, 11 Jun 2019 14:59:50 GMT

I am creating a Powershell script for updating iLo firmware for iLo4 & iLo5 models, using the Update-HPEILOFirmware cmdlet in the version 2.2.0.0 cmdlet library. I've tried both with & without the cmdlet swithc parameters -Force and -Confirm, and it always prompts me for confirmation. Inputting "A" for Yes to All doesn't prevent the prompt for displaying before the subsequent iLO update either.

Interactive prompts are death to a script! For those that desire prompting, we can always get a prompted interactive experience via the iLo GUI interface. Has anyone found a way to prevent the interactive prompt (shown here) when using the PS cmdlet?

Re: iLO Powershell Cmdlets ver 2.2.0.0 & Update-HPEILOFirmware prompting

Paul_J_K — Wed, 12 Jun 2019 16:11:04 GMT

It is difficult to comment without the actual script command being used which is throwing this confirmation.

There is possibly multiple levels of confirmation being requested and possibly UAC as well. Not sure if all of the following has been tried.

-Confirm:$false

-Force -Recurse

Other references: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00045034en_us&docLocale=en_US

Re: iLO Powershell Cmdlets ver 2.2.0.0 & Update-HPEILOFirmware prompting

Steve_Tippett — Wed, 12 Jun 2019 19:36:55 GMT

Paul, thanks for your response.

I've tried both with and without the -Force and -Confirm switch parameters, and it always prompts me for confirmation.

You asked for the actual command - here it is:

$Firmware_File = $Current_Path + "\" + $iLo_firmware
$Result = Update-HPEiLOFirmware -Connection $Connected_iLo -Location $Firmware_File -Force

Yes, I have referred to the User Guide and the Get-Help for this cmdlet.

Re: iLO Powershell Cmdlets ver 2.2.0.0 & Update-HPEILOFirmware prompting

Steve_Tippett — Wed, 12 Jun 2019 19:38:10 GMT

I should also add that this prompting did not occur in the previous (2.0.0) version of the cmdlet.

Re: iLO Powershell Cmdlets ver 2.2.0.0 & Update-HPEILOFirmware prompting

Chris29 — Fri, 14 Jun 2019 13:10:44 GMT

hello,

have you tried :

$Result = Update-HPEiLOFirmware -Connection $Connected_iLo -Location $Firmware_File -Confirm: $false

$Result = Update-HPEiLOFirmware -Connection $Connected_iLo -Location $Firmware_File -Confirm:$false

Can't remember if the space is needed or not.

Test and tell us if it's working.

Re: iLO Powershell Cmdlets ver 2.2.0.0 & Update-HPEILOFirmware prompting

Steve_Tippett — Fri, 14 Jun 2019 14:32:53 GMT

Chris, thanks for the education! I was adhering to the strict definition of not providing a value with a switch parameter. It turns out that using this format -Confirm:$false was successful: the update proceeded and no prompting occurred. I appreciate your assistance.

Re: iLO Powershell Cmdlets ver 2.2.0.0 & Update-HPEILOFirmware prompting

Chris29 — Fri, 14 Jun 2019 15:39:30 GMT

I'm happy to have helped you.