topic Re: ILO3 and SNMP in Server Management - Remote Server Management

ILO3 and SNMP

testmado662 — Fri, 23 Aug 2019 07:54:43 GMT

Hello,

I don't know how to configure ILO3 SNMP in order to entered V2 public and access to my monitoring server.
ILO can't connect to monitoring server and I've installed ILO3 latest version.
MIB walker don't work too. OS is an Hypervisor and I can't configure SNMP from OS like Windows Server.

Is there a release note about that issue ?

Regards

Re: ILO3 and SNMP

KK — Tue, 27 Aug 2019 02:14:55 GMT

Hi,

From the images shared in your post, the iLO SNMP seems to be configured correctly.

For getting the trap/ alert or running MIB walker, use the community string as - public and it should work properly.

For the Hypervisor OS - VMware ESXi, HPE does not provide any SNMP based management agents, instead use the offline bundle which contains SMX provider based on CIMOM.

Regards,

Re: ILO3 and SNMP

testmado662 — Mon, 02 Sep 2019 06:51:46 GMT

Hello,

But I don't where I could declare public for SNMP V2. Without Public, ILO can connect to monitoring server.

Thanks