RIBCL script to read / modify ILO parametres

nabilio1 — Mon, 02 Dec 2019 11:37:08 GMT

Hello

I want to retrieve some information from the ILO, after which I will like to modify them.
through an ssh connection on the chassis, i want to get :

Server name
date / time of the ILO
Timzone (located in sntp configuration)

I use the RIBCL script below :

hponcfg All << end_marker

<RIB_INFO MODE="read">

<GET_NETWORK_SETTINGS/>

</RIB_INFO>

<SERVER_INFO MODE="READ" >

<GET_SERVER_NAME />

</SERVER_INFO>

</LOGIN>

</RIBCL>

end_marker

the result of the GET_NETWORK_SETTINGS command returns me a large amount of information, whereas I need only timzone information, is there a way to get only this parameter ?

the second point, I still can not find the command RIBCL or parameter to read the date / time BIOS for all devices Bays on chassis (servers)

thanks in advance

Re: RIBCL script to read / modify ILO parametres

Harsh_b — Tue, 10 Dec 2019 08:45:22 GMT

Hello There,

May i know which model server is it ?

Regards

topic Re: RIBCL script to read / modify ILO parametres in Server Management - Remote Server Management

RIBCL script to read / modify ILO parametres

Re: RIBCL script to read / modify ILO parametres