Scripting Question - iLO 5 - High Security Mode with 'Require Host Authentication' disabled

superiormirage — Tue, 18 Feb 2020 15:52:26 GMT

We've recently rolled out a large number of ProLiant servers with iLO 5. Because of the number of servers, we script any configuration changes we need to roll out.

Recently, we decided to enable 'High Security Mode' on our iLO 5s, but with 'Require Host Authentication' Disabled. (An odd requirement, I know.)

I use hponcfg to configure our iLOs. I've found the setting to enable 'High Security Mode', but I cannot find the setting to set/disable 'Require Host Authentication'.

My question is: using hponcfg, how do I set the 'Require Host Authentication'?

Re: Scripting Question - iLO 5 - High Security Mode with 'Require Host Authentication' disabled

KranthiKiranG — Wed, 19 Feb 2020 11:24:17 GMT

Hi.

We can only provide you the utility userguide and from this userguide you can script using the examples provided in the guide.

https://support.hpe.com/hpesc/public/docDisplay?docId=c03334058

It will not give the exact command but using the examples we need to build our script.

topic Scripting Question - iLO 5 - High Security Mode with 'Require Host Authentication' disabled in Server Management - Remote Server Management

Scripting Question - iLO 5 - High Security Mode with 'Require Host Authentication' disabled

Re: Scripting Question - iLO 5 - High Security Mode with 'Require Host Authentication' disabled