topic Re: ILOm - Enable LDAP V3 Support in Server Management - Remote Server Management

ILOm - Enable LDAP V3 Support

Roehmer — Mon, 20 Apr 2020 06:30:13 GMT

Hi,

we're using an OpenLDAP Server for central authentication. LDAPv2 isn't enabled by default. OpenLDAP says to Version 2.0: "LDAPv2 should be avoided. LDAPv2 is disabled by default."

Based on the user guide LDAPv2 only is supported when using directory integration.

The result ist if we're using OpenLDAP with default settings: "Server Error Message: historical protocol version requested, use LDAPv3 instead"

My questions are: Why LDAP v3 isn't supported? Could this be done?

Kind Regards

Re: ILOm - Enable LDAP V3 Support

SanjeevGoyal — Wed, 22 Apr 2020 13:33:03 GMT

Hello,

Please explain your query.

1. What is the server model or ILO version ( iLO3, ILO 4 or ILO5)

2. What is the ILO firmware version?

3. What is the exact your query?

Regards,

Re: ILOm - Enable LDAP V3 Support

Roehmer — Thu, 23 Apr 2020 04:41:48 GMT

Hi,

thanks for your reply.

1. ILO4 and 5

2. 2.70(ILO4) and 1.43(ILO5), but it doesn't matter. Concerns all versions

3. ILO LDAP Client presupposes LDAPv2 as minimum protocol version. Connect ILO to a fresh installed OpenLDAP Server (ILO Login->Security->Directory->generic LDAP (use directory default schema). The OpenLDAP Server will show you the following error during a bind operation:

LDAP Server Error (2)
Server Error Message: historical protocol version requested, use LDAPv3 instead

Regarding to ILO documentation OpenLDAP as LDAP dIrectory is supportet. But OpenLDAP prohibits the usage of LDAPV2.

I would like to ask if it would be possible to use LDAPv3 in ILO firmware when connection to an LDAP Directory? Especially since the ldapv3 specification existes since 1997.

Re: ILOm - Enable LDAP V3 Support

SanjeevGoyal — Thu, 23 Apr 2020 13:14:17 GMT

Hello,

I hope the below documents will help you for more clarification.

HPE Integrated Lights Out (iLO 4) - Troubleshooting Directory Issues

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-a00045760en_us

HPE Integrated Lights-Out (iLO)

https://h20195.www2.hpe.com/v2/GetPDF.aspx/c04154343.pdf

Regards,

Re: ILOm - Enable LDAP V3 Support

Roehmer — Fri, 24 Apr 2020 03:55:56 GMT

Hi,

no it doesnt help.

ILO Formware (LDAP CLient) has to talk LDAPv3 instead of LDAPv2.

Kind regards

Re: ILOm - Enable LDAP V3 Support

AmRa — Wed, 29 Apr 2020 04:58:02 GMT

Standards—iLO directory support is based on the LDAP 2.0 standard for secure directory access. iLO Kerberos support is based on LDAP v3.

Please refer HPE iLO 5 User Guide (Page number 249 ) for steps to configuring Kerberos authentication settings in iLO

https://support.hpe.com/hpesc/public/docDisplay?docId=a00018324en_us

Re: ILOm - Enable LDAP V3 Support

Roehmer — Wed, 29 Apr 2020 05:16:00 GMT

Hi,

I read the ILO docúmentation. Im talking about LDAP Authentication and not Kerberos SSO. This documentaiton is a bit confusing because LDAP has noting to do whith Kerberos. I really don't understand 'iLO Kerberos support is based on LDAP v3.'

The point is that HP iLO officially supports OpenLDAP as directory backend. OpenLDAP has disabled LDAPv2 by default because of security considerations. So, you have to enable this old LDAPv2 if you want to connect your iLO boards. Wouldn't ist be better to fully support LDAPv3? We're living in 2020...