DL360 Gen10 IPMI UID sensor (reading_type 0x70 / type 0xc0) values

Felipe-c — Wed, 10 Jun 2020 04:50:54 GMT

Hi.,

For Gen8 and Gen9 servers, the following document describes the possible values for the UID and Sys Health LED sensors: https://support.hpe.com/hpesc/public/docDisplay?docId=mmr_kc-0109788

What is the bitmap offset/possible values for the UID sensor on Gen10 servers? They seem to use the same reading type and and sensor type of previous versions, but the values (bitmap) seems to have changed?

Thanks,

Felipe.

Re: DL360 Gen10 IPMI UID sensor (reading_type 0x70 / type 0xc0) values

Emraansy — Wed, 10 Jun 2020 11:46:00 GMT

Hi,

Please refer to the below link, hope this helps

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-a00026902en_us

topic Re: DL360 Gen10 IPMI UID sensor (reading_type 0x70 / type 0xc0) values in Server Management - Remote Server Management

DL360 Gen10 IPMI UID sensor (reading_type 0x70 / type 0xc0) values

Re: DL360 Gen10 IPMI UID sensor (reading_type 0x70 / type 0xc0) values