Scripting Question - iLO 5 - High Security Mode with 'Require Host Authentication' disabled

khanahoe — Tue, 11 Aug 2020 13:46:56 GMT

Hi, I have the exact same question as asked by superiormirage here: https://community.hpe.com/t5/server-management-remote-server/scripting-question-ilo-5-high-security-mode-with-require-host/td-p/7079566#.XzKeOxNKhQ1

The provide anser didn't answer the question for me.

I want to enable 'High Security Mode' on our iLO 5s, but with 'Require Host Authentication' Disabled. We use hponcfg to configure our iLOs. I've found the setting to enable 'High Security Mode', but I cannot find the setting to set/disable 'Require Host Authentication'.

My question is: using hponcfg, how do I set the 'Require Host Authentication'?

Re: Scripting Question - iLO 5 - High Security Mode with 'Require Host Authentication' disabled

Sanilk — Thu, 13 Aug 2020 12:43:04 GMT

Hi ,

There is no specific settings noticed in hponcfg tool .

https://support.hpe.com/hpesc/public/docDisplay?docId=a00018323en_us

However you can disable /enable the same via ILO GUI .

Steps are ;

topic Scripting Question - iLO 5 - High Security Mode with 'Require Host Authentication' disabled in Server Management - Remote Server Management

Scripting Question - iLO 5 - High Security Mode with 'Require Host Authentication' disabled

Re: Scripting Question - iLO 5 - High Security Mode with 'Require Host Authentication' disabled