https://community.hpe.com/t5/server-management-remote-server/codepage-problems-and-ilo-rib/m-p/3034343#M9 The difference here was unintentional. This will be corrected in a future release of the F/W. For now, if the locale settings on the client and the server match, you can leave iLO on 437 and it should work just fine. Tue, 29 Jul 2003 16:52:30 GMT Junior Yharte 2003-07-29T16:52:30Z https://community.hpe.com/t5/server-management-remote-server/codepage-problems-and-ilo-rib/m-p/3034342#M8 We need to run some servers in NON-english/437 mode. The clients, accessing the RIB/ILO are never English/437 machines.<BR />This is not a problem when using PCI-based RIB cards in DL380/360 but the IL(almost)O, specifically the DL380G3, does not correctly translate. Why the difference and what to do about it. Sat, 26 Jul 2003 21:01:36 GMT https://community.hpe.com/t5/server-management-remote-server/codepage-problems-and-ilo-rib/m-p/3034342#M8 Internet Admin 2003-07-26T21:01:36Z https://community.hpe.com/t5/server-management-remote-server/codepage-problems-and-ilo-rib/m-p/3034343#M9 The difference here was unintentional. This will be corrected in a future release of the F/W. For now, if the locale settings on the client and the server match, you can leave iLO on 437 and it should work just fine. Tue, 29 Jul 2003 16:52:30 GMT https://community.hpe.com/t5/server-management-remote-server/codepage-problems-and-ilo-rib/m-p/3034343#M9 Junior Yharte 2003-07-29T16:52:30Z