topic How to restore Network options under the Security -> Access Settings to enable media in Server Management - Remote Server Management

How to restore Network options under the Security -> Access Settings to enable media

Matthew Murdock — Tue, 10 May 2022 16:12:34 GMT

Picked up a DL360 G10 Server with 64gb ram single processor, but as I go into the ILO under the Security Access Settings, there is no Network options to enable the virutal media. Would a Lifecycle Managment __> Decommission be warranted at this point or is there some cli level command that can be ran to get things to appear again?

Re: How to restore Network options under the Security -> Access Settings to enable medi

Suman_1978 — Tue, 10 May 2022 05:52:12 GMT

Hi,

Have you tried to Reset iLO to factory defaults?
Resetting iLO 5 to factory defaults

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00030079en_us
https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00026113en_us

Thank You!
I work with HPE but opinions expressed here are mine.
Recent Support Video Releases

Re: How to restore Network options under the Security -> Access Settings to enable medi

Matthew Murdock — Mon, 23 May 2022 14:07:57 GMT

Thanks. I actually had to go through intelligent provisioning and did a secure wipe and reload of system defaults. then it came back.

Re: How to restore Network options under the Security -> Access Settings to enable medi

Sunitha_Mod — Tue, 24 May 2022 05:25:30 GMT

Hello @Matthew Murdock,

Perfect! Glad to know the problem has been resolved.