topic Re: ILO 4 and 5 NTP settings in Server Management - Remote Server Management

ILO 4 and 5 NTP settings

Stefan_Matela — Fri, 06 Dec 2019 14:53:14 GMT

Hello,

I have 2 questions:

- How can I check what's the status of ILO NTP synchronisation? Something like ntpq -p in Linux?

- There are NTP settings (not statuses) in ILO GUI under: iLO Dedicated Network Port->SNTP, is the same info available in ILO CLI eg. show /path_to_some_target?

Re: ILO 4 and 5 NTP settings

SanjeevGoyal — Mon, 09 Dec 2019 06:48:39 GMT

Hello ,

Please follow the below advisory for iLO commands

Simplivity Hyper-V - NTP Related Issues & Troubleshooting (Page no 4)

https://support.hpe.com/hpsc/doc/public/display?docLocale=en_US&docId=mmr_sf-EN_US000061591&withFrame

Regards,

Re: ILO 4 and 5 NTP settings

Stefan_Matela — Tue, 10 Dec 2019 13:06:23 GMT

Hi,

This document doesn't mention any ILO commands.

Re: ILO 4 and 5 NTP settings

SanjeevGoyal — Tue, 10 Dec 2019 22:48:00 GMT

Hello,

Please follow the below iLO 4 Command Line Guide

HPE iLO 4 Scripting and Command Line Guide

Regards,

Re: ILO 4 and 5 NTP settings

Stefan_Matela — Wed, 11 Dec 2019 09:29:00 GMT

Again. This document is not relevant. It doesn't tell how to check NTP synchronization status from ILO.

Re: ILO 4 and 5 NTP settings

Jimmy Vance — Wed, 11 Dec 2019 14:16:54 GMT

@Stefan_Matela wrote:
Hello,
I have 2 questions:
- How can I check what's the status of ILO NTP synchronisation? Something like ntpq -p in Linux?
- There are NTP settings (not statuses) in ILO GUI under: iLO Dedicated Network Port->SNTP, is the same info available in ILO CLI eg. show /path_to_some_target?

THere is not a way to check sync status in the iLO itself.

I cannot find any mention of these setting in the SMASH CLI commands. NTP settings can be shown, set, or changed using RIBCL.

Re: ILO 4 and 5 NTP settings

rgb99 — Tue, 28 Jan 2020 21:00:44 GMT

For everyone's edification, an example on how to set NTP via HPEiLOCmdlets, is:

$SntpServers = ,@("ntp1.domain.com,"ntp2.domain.com") Set-HPEiLOSNTPSetting -Connection $connection ` -DHCPv4NTPServer Disabled ` -DHCPv6NTPServer Disabled ` -PropagateTimetoHost Disabled ` -Timezone "Atlantic/Reykjavik" ` -SNTPServer $SntpServers

Re: ILO 4 and 5 NTP settings

Pone — Fri, 03 Jun 2022 09:23:20 GMT

Is there really no way to check NTP status on ILO? Are you supposed to just fill in an an adress and hope for the best? No way to know if the NTP server is availible, firewall correctly setup etc? There must be someything I am missing here., are you supposed to work on a different way with this?

Re: ILO 4 and 5 NTP settings

rgb99 — Fri, 03 Jun 2022 18:11:12 GMT

Hope for the best? No, you should know what NTP servers are valid, internal or external. There is a large community that supports pool.ntp.org.

I haven't worked on HPE servers in a couple of years, but maybe they made changes or improvements in iLO 5 to test NTP connectivity.

Good luck to you.

Re: ILO 4 and 5 NTP settings

Pone — Fri, 03 Jun 2022 18:57:19 GMT

If you cant verify it I think it is the same as ”hope for the best”. Who set up their environment and just assume it works? Maybe you could check firewall logs or if it is possible to see all NTP clients that syncs to the NTP server (closest NTP source is win 2019). But that is a strange way to verify.

We still only have ILO 4.

But if no one knows about this then I guess there really is no way for the ILO itself to tell you it is in sync.

Re: ILO 4 and 5 NTP settings

Sunitha_Mod — Tue, 07 Jun 2022 10:41:58 GMT

Hello @Pone,

Thank you for reaching out to us! I would recommend you to create a new topic using the create "New Discussion" button, so that experts can look into it.