https://community.hpe.com/t5/proliant-deployment-and/second-pxe-server/m-p/3440049#M1336 Hi,<BR /> <BR />I'm having problems with a second PXE server that I've installed. Here's my Scenario.<BR /> <BR />I have a PXE / Deployment server on a 10.16.1 network which also host a DHCP server, all servers within this VLAN obtain an IP address and are able to obtain images without any problems.<BR /> <BR />I've just installed a secondary PXE server in a differnet VLAN 10.16.2 which also host a DHCP server. The problem I'm having is that I seem to have errors in the Event Log refrerring to the Master PXE server. And I'm not quite sure how to reactify this message. <BR /> <BR />The following message is logged.<BR /> <BR />Source : PxeServices<BR />Error: Unable to query master PXE proxyDHCP for multicast Address Allocation pararmeters. <BR /> <BR />Thats it, I think this is the main reason why I cannot deploy any images on my second VLAN. Does anybody know how to reactify this.<BR /> <BR />Thanks<BR />Shaun. <BR /> Thu, 09 Dec 2004 09:59:27 GMT Shaun Wells_4 2004-12-09T09:59:27Z https://community.hpe.com/t5/proliant-deployment-and/second-pxe-server/m-p/3440049#M1336 Hi,<BR /> <BR />I'm having problems with a second PXE server that I've installed. Here's my Scenario.<BR /> <BR />I have a PXE / Deployment server on a 10.16.1 network which also host a DHCP server, all servers within this VLAN obtain an IP address and are able to obtain images without any problems.<BR /> <BR />I've just installed a secondary PXE server in a differnet VLAN 10.16.2 which also host a DHCP server. The problem I'm having is that I seem to have errors in the Event Log refrerring to the Master PXE server. And I'm not quite sure how to reactify this message. <BR /> <BR />The following message is logged.<BR /> <BR />Source : PxeServices<BR />Error: Unable to query master PXE proxyDHCP for multicast Address Allocation pararmeters. <BR /> <BR />Thats it, I think this is the main reason why I cannot deploy any images on my second VLAN. Does anybody know how to reactify this.<BR /> <BR />Thanks<BR />Shaun. <BR /> Thu, 09 Dec 2004 09:59:27 GMT https://community.hpe.com/t5/proliant-deployment-and/second-pxe-server/m-p/3440049#M1336 Shaun Wells_4 2004-12-09T09:59:27Z https://community.hpe.com/t5/proliant-deployment-and/second-pxe-server/m-p/3440050#M1337 Sounds like a network issue. Perhaps your switch/router is not passing the PXE traffic properly?<BR /><BR />Not even sure if there is such a thing as PXE specific traffic that a switch would/could block, but I think there is. Damn I wish I had a lab.<BR /><BR /><BR />Steven Thu, 09 Dec 2004 18:39:08 GMT https://community.hpe.com/t5/proliant-deployment-and/second-pxe-server/m-p/3440050#M1337 Steven Clementi 2004-12-09T18:39:08Z