https://community.hpe.com/t5/proliant-deployment-and/ml350-new-array/m-p/3175554#M441 I configured my array with raid 5 and I have three drives. Which isn't a problem. How ever when i run smartstart, I get an error about not having a boot device. I just want to make sure that it's not my array configuration. I need to make the logic drive active with an operating system, I believe...<BR /><BR />Thanks in advance.<BR /> Tue, 27 Jan 2004 14:31:24 GMT Fernie_1 2004-01-27T14:31:24Z https://community.hpe.com/t5/proliant-deployment-and/ml350-new-array/m-p/3175554#M441 I configured my array with raid 5 and I have three drives. Which isn't a problem. How ever when i run smartstart, I get an error about not having a boot device. I just want to make sure that it's not my array configuration. I need to make the logic drive active with an operating system, I believe...<BR /><BR />Thanks in advance.<BR /> Tue, 27 Jan 2004 14:31:24 GMT https://community.hpe.com/t5/proliant-deployment-and/ml350-new-array/m-p/3175554#M441 Fernie_1 2004-01-27T14:31:24Z https://community.hpe.com/t5/proliant-deployment-and/ml350-new-array/m-p/3175555#M442 I assume you used the Online Configuration for Raid Arrays (ORCA) to build the array. Just do a system erase from the Smartstart CD, then configure the array in Smartstart and all should be well. If it's not giving you the option to run system erase, create the system erase diskette from the smartstart CD on another system. Wed, 28 Jan 2004 07:41:56 GMT https://community.hpe.com/t5/proliant-deployment-and/ml350-new-array/m-p/3175555#M442 Ken Henault 2004-01-28T07:41:56Z