https://community.hpe.com/t5/proliant-deployment-and/vflop-eject/m-p/3202040#M523 Hi using the ILO on a dl380G3 to do a scripted build works fine for the building ,but it seems to be a problem to get the vflop to eject the vflop image to stop going into a loop any ideas Wed, 25 Feb 2004 11:16:09 GMT mark_435 2004-02-25T11:16:09Z https://community.hpe.com/t5/proliant-deployment-and/vflop-eject/m-p/3202040#M523 Hi using the ILO on a dl380G3 to do a scripted build works fine for the building ,but it seems to be a problem to get the vflop to eject the vflop image to stop going into a loop any ideas Wed, 25 Feb 2004 11:16:09 GMT https://community.hpe.com/t5/proliant-deployment-and/vflop-eject/m-p/3202040#M523 mark_435 2004-02-25T11:16:09Z https://community.hpe.com/t5/proliant-deployment-and/vflop-eject/m-p/3202041#M524 To get around this I have created a hardware configurations file to disable diskette boot, then applty it using conrep. Tue, 02 Mar 2004 18:49:54 GMT https://community.hpe.com/t5/proliant-deployment-and/vflop-eject/m-p/3202041#M524 Ken Henault 2004-03-02T18:49:54Z https://community.hpe.com/t5/proliant-deployment-and/vflop-eject/m-p/3202042#M525 Thanks ken sorry for the late reply been away we will try this and see if we can use it as a resolve Tue, 16 Mar 2004 04:48:51 GMT https://community.hpe.com/t5/proliant-deployment-and/vflop-eject/m-p/3202042#M525 mark_435 2004-03-16T04:48:51Z