https://community.hpe.com/t5/proliant-deployment-and/rdp-error-codes/m-p/4009392#M5290 Heres another one.<BR /><BR />Albert Thu, 31 May 2007 08:15:16 GMT Albert Austin 2007-05-31T08:15:16Z https://community.hpe.com/t5/proliant-deployment-and/rdp-error-codes/m-p/4009390#M5288 I was attempting to deploy an image to a BL480c server and at about 80% of the Altiris image restore bar, the install stopped and we went back to the WinPE screen. The write job failed. I checked the status details and got a message at the RDeploy step which said "File Seek Operation Failed" with a code of 101. Does HP or Altiris have any tables which describe these error codes?<BR /> <BR />I am using RDP version 3.10 and Windows 2003 standard. We scripted the Win install and captured the image with no problems. The image was captured from a BL480c. We tried restoring the image to a second BL480c blade and got the same result. Restoring a captured Linux image to BL460c blades completes successfully. Tue, 29 May 2007 16:21:02 GMT https://community.hpe.com/t5/proliant-deployment-and/rdp-error-codes/m-p/4009390#M5288 William Norman 2007-05-29T16:21:02Z https://community.hpe.com/t5/proliant-deployment-and/rdp-error-codes/m-p/4009391#M5289 Hi,<BR />Check this document out, hope it helps.<BR /><BR />Albert Wed, 30 May 2007 02:12:05 GMT https://community.hpe.com/t5/proliant-deployment-and/rdp-error-codes/m-p/4009391#M5289 Albert Austin 2007-05-30T02:12:05Z https://community.hpe.com/t5/proliant-deployment-and/rdp-error-codes/m-p/4009392#M5290 Heres another one.<BR /><BR />Albert Thu, 31 May 2007 08:15:16 GMT https://community.hpe.com/t5/proliant-deployment-and/rdp-error-codes/m-p/4009392#M5290 Albert Austin 2007-05-31T08:15:16Z