https://community.hpe.com/t5/proliant-deployment-and/deploying-image-with-correct-disk-settings/m-p/4152282#M5906 Hi,<BR /><BR />Bit of a newb...i have built a DL380 with c:\ at 20GB and e:\ at 150GB, i take an image OK, when i deploy that image it just creates one large c:\. How do i ensure the image deployed has the correct drive allocation? Many thanks. Thu, 28 Feb 2008 10:08:08 GMT jeremy reynolds_1 2008-02-28T10:08:08Z https://community.hpe.com/t5/proliant-deployment-and/deploying-image-with-correct-disk-settings/m-p/4152282#M5906 Hi,<BR /><BR />Bit of a newb...i have built a DL380 with c:\ at 20GB and e:\ at 150GB, i take an image OK, when i deploy that image it just creates one large c:\. How do i ensure the image deployed has the correct drive allocation? Many thanks. Thu, 28 Feb 2008 10:08:08 GMT https://community.hpe.com/t5/proliant-deployment-and/deploying-image-with-correct-disk-settings/m-p/4152282#M5906 jeremy reynolds_1 2008-02-28T10:08:08Z https://community.hpe.com/t5/proliant-deployment-and/deploying-image-with-correct-disk-settings/m-p/4152283#M5907 Hi jeremy reynolds<BR /><BR />Sorry, I cannot understand your writing.<BR />(I may write a different reply from your question.)<BR /><BR />*** Check partition size ***<BR />1. Start "Deployment Console"<BR />2. Right click in the job window, and select "New job".<BR />3. Click "Add", and select "Distribute Disk Image".<BR />4. Specify the path/file of the image which you created by "Name" of "Select a disk image file".<BR />5. Click "Advanced" of the same dialog.(Lower right)<BR /><BR />6. Click Cancel<BR />7. Delete job.<BR /><BR />When you wish, You can distribution by changing size.<BR /><BR />I wish for this helping you.<BR /><BR />Regards, kita<BR /> Wed, 05 Mar 2008 11:42:17 GMT https://community.hpe.com/t5/proliant-deployment-and/deploying-image-with-correct-disk-settings/m-p/4152283#M5907 Yuichiro Kitamura 2008-03-05T11:42:17Z