https://community.hpe.com/t5/proliant-deployment-and/capturing-an-image/m-p/4458617#M7089 Hi Brown Mariki,<BR /><BR />I am not very clear on the question you have asked.<BR /><BR />If you question means how to capture the RDP server image itself for future use, than it is not possible to capture the image of the RDP server itself. If there is more than one RDP server then we could use one RDP server to capture the image of the other.<BR /><BR />If you want to capture an image of the already installed server you could use the Server Imaging - Capture option to capture an image and use the Server Imaging - Write option to re-deploy.<BR /><BR />Regards,<BR />Raj. Tue, 21 Jul 2009 09:11:55 GMT Rajashekar Chintakunta 2009-07-21T09:11:55Z https://community.hpe.com/t5/proliant-deployment-and/capturing-an-image/m-p/4458616#M7088 Hi,<BR />I need to capture an image from imaged server on the rdp and create an image to the same rdp for future use.<BR />How do I do this?<BR /><BR />thanks,<BR />Brown Mon, 13 Jul 2009 13:39:38 GMT https://community.hpe.com/t5/proliant-deployment-and/capturing-an-image/m-p/4458616#M7088 Brown Mariki 2009-07-13T13:39:38Z https://community.hpe.com/t5/proliant-deployment-and/capturing-an-image/m-p/4458617#M7089 Hi Brown Mariki,<BR /><BR />I am not very clear on the question you have asked.<BR /><BR />If you question means how to capture the RDP server image itself for future use, than it is not possible to capture the image of the RDP server itself. If there is more than one RDP server then we could use one RDP server to capture the image of the other.<BR /><BR />If you want to capture an image of the already installed server you could use the Server Imaging - Capture option to capture an image and use the Server Imaging - Write option to re-deploy.<BR /><BR />Regards,<BR />Raj. Tue, 21 Jul 2009 09:11:55 GMT https://community.hpe.com/t5/proliant-deployment-and/capturing-an-image/m-p/4458617#M7089 Rajashekar Chintakunta 2009-07-21T09:11:55Z