https://community.hpe.com/t5/proliant-deployment-and/problem-imaging-2-logical-drives/m-p/3356855#M980 Hi, I'm using RDP (Altiris Deployment Server 6.1) to image a server with a mirrored pair of 72.8 GB disks. There are 2 logical drives. On the first logical drive is 3 partitions and a single partition on the 2nd logical drive. When I create the image, the image only contains the 3 partitions from the 1st logical drive. I can't see any settings to specify the 2nd logical drive to be imaged or included in imaging of the whole disk.<BR /><BR />Please help<BR /><BR /><BR />Tim C Fri, 13 Aug 2004 10:11:33 GMT Tim Collins_10 2004-08-13T10:11:33Z https://community.hpe.com/t5/proliant-deployment-and/problem-imaging-2-logical-drives/m-p/3356855#M980 Hi, I'm using RDP (Altiris Deployment Server 6.1) to image a server with a mirrored pair of 72.8 GB disks. There are 2 logical drives. On the first logical drive is 3 partitions and a single partition on the 2nd logical drive. When I create the image, the image only contains the 3 partitions from the 1st logical drive. I can't see any settings to specify the 2nd logical drive to be imaged or included in imaging of the whole disk.<BR /><BR />Please help<BR /><BR /><BR />Tim C Fri, 13 Aug 2004 10:11:33 GMT https://community.hpe.com/t5/proliant-deployment-and/problem-imaging-2-logical-drives/m-p/3356855#M980 Tim Collins_10 2004-08-13T10:11:33Z