topic Query: Updating firmware on S2D cluster with HPE NVME drives in Server Clustering

Updating firmware on S2D cluster with HPE NVME drives

tict — Fri, 09 Dec 2022 07:06:13 GMT

Hi all,

We've been looking to see if the HP ProLiant DL380Gen10 servers which we have running in an S2D cluster are capable of updating the NVME drives firmware with the procedure mentions here:

https://learn.microsoft.com/nl-nl/shows/windowsserver/update-drive-firmware-without-downtime-in-storage-spaces-direct

Normally we would update the firmware through iLO or the Windows exe on the system itself. Since this is a S2D system, the suggested firmware update is the above procedure. but i cannot find any documentation on support.hpe.com that describes the firmware updates through Windows with the xml file and the commands it uses: Update-StorageFirmware

I've extracted the firmware EXE file and it has the FILENAME.rel file in it, so I think this file needs to be visisble on the CSV drive

Thank u!

Can someone confirm me that this is possbile?

Query: Updating firmware on S2D cluster with HPE NVME drives

support_s — Sat, 26 Nov 2022 11:43:22 GMT

System recommended content:

1. HPE ProLiant DL380 Gen10 Server User Guide | Installing an NVMe drive

2. Cray ClusterStor E1000 Firmware Guide (4.x) (H-6206) | HDD/SSD/NVMe Firmware Check/Update Procedure

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

Re: Updating firmware on S2D cluster with HPE NVME drives

Tim-Gross — Thu, 08 Dec 2022 12:42:17 GMT

Here's a link with more detailed information that outlines checking the storage device to see if the firmware even supports the Update Firmware process and includes a "default" XML file.

https://learn.microsoft.com/en-us/windows-server/storage/update-firmware

Hope this helps.

Re: Updating firmware on S2D cluster with HPE NVME drives

tict — Mon, 12 Dec 2022 09:07:45 GMT

Level 2 support from HPE adviced me to NOT update the firmware with the mentioned method. The do NOT officially support the 'Update-StorageFirmware' powershell command.

I need to put the node into maintenace mode, boot it from the SPP and then update the firmware from the drives. We will try this next weekend.