topic Re: CR3500 change from Active/Passive to Active/Active in Server Clustering

CR3500 change from Active/Passive to Active/Active

Scott Shoop — Thu, 14 Jul 2005 08:40:09 GMT

How do you change the failover mode from Active/Passive on a Proliant CL 380?

Re: CR3500 change from Active/Passive to Active/Active

Doug de Werd — Mon, 18 Jul 2005 10:06:19 GMT

You should be able to do it with the CR3500 Config Utility.

See if this helps:

http://h200007.www2.hp.com/bc/docs/support/UCR/SupportManual/TPM_157839-004/TPM_157839-004.pdf

Thanks,
Doug

Re: CR3500 change from Active/Passive to Active/Active

Scott Shoop — Wed, 20 Jul 2005 04:52:03 GMT

OK, but when I go into the CR3500 config utility in the Host Ports tab shows Active/Passive and the second controller is grayed out. Do I have to reinstall the software to configure the second controller?

Thanks,
Scott