https://community.hpe.com/t5/server-clustering/msa500-package-cluster-array-rebuild/m-p/3798807#M248 Hi,<BR /><BR />I have a package cluster with 2 DL380 G3 and a MSA500. <BR />The MSA 500 is fully loaded with 36GB disks.<BR />My operating system is W2K3 with SP1.<BR />For two times this week when a disk fails (the first disk to fail was disk 1 and today is disk 5) the cluster resources jump from one node to the other and finally the cluster service stops.<BR />Then Insights tell me that a rebuild is started (witch takes long time) and the cluster service stays down until the rebuild finishes.<BR />When the rebuild ends the cluster service starts ok, and I can replace de damaged disk without deny of service.<BR /><BR />I would appreciate if someone could help me.<BR /><BR />Thanks.<BR /> Thu, 01 Jun 2006 13:03:11 GMT MGATTOR 2006-06-01T13:03:11Z https://community.hpe.com/t5/server-clustering/msa500-package-cluster-array-rebuild/m-p/3798807#M248 Hi,<BR /><BR />I have a package cluster with 2 DL380 G3 and a MSA500. <BR />The MSA 500 is fully loaded with 36GB disks.<BR />My operating system is W2K3 with SP1.<BR />For two times this week when a disk fails (the first disk to fail was disk 1 and today is disk 5) the cluster resources jump from one node to the other and finally the cluster service stops.<BR />Then Insights tell me that a rebuild is started (witch takes long time) and the cluster service stays down until the rebuild finishes.<BR />When the rebuild ends the cluster service starts ok, and I can replace de damaged disk without deny of service.<BR /><BR />I would appreciate if someone could help me.<BR /><BR />Thanks.<BR /> Thu, 01 Jun 2006 13:03:11 GMT https://community.hpe.com/t5/server-clustering/msa500-package-cluster-array-rebuild/m-p/3798807#M248 MGATTOR 2006-06-01T13:03:11Z