https://community.hpe.com/t5/insight-remote-support/webes-configuration-on-hp-ux-11-11/m-p/4296408#M1583 <BR />Try this again:<BR />cimconfig -s enableSubscriptionsForNonprivilegedUsers=false -p<BR /><BR />You should see:<BR />Planned value for the property enableSubscriptionsForNonprivilegedUsers is set to "false" in CIMServer.<BR /><BR />Run: cimconfig -l -p to check, then stop/start cimserver.<BR /><BR />Remember -c is current, -p is planned.<BR /> Thu, 30 Oct 2008 11:54:50 GMT Liem Nguyen 2008-10-30T11:54:50Z https://community.hpe.com/t5/insight-remote-support/webes-configuration-on-hp-ux-11-11/m-p/4296407#M1582 Gentlemen:<BR /><BR />Why am I not able to set these parameters to true? I see that my commands have updated the necessary files...<BR /><BR />I am trying to set enableSubscriptionsForNonprivilegedUsers and enableRemotePrivilegedUserAccess to false over here. I tried restarting cimserver after that.<BR /><BR />sccsoidr(root):/sbin/init.d:# cimconfig -l -c<BR />enableAuditLog=false<BR />sslClientVerificationMode=disabled<BR />enableSubscriptionsForNonprivilegedUsers=false<BR />shutdownTimeout=30<BR />authorizedUserGroups=<BR />enableRemotePrivilegedUserAccess=true<BR />enableHttpsConnection=true<BR />enableNamespaceAuthorization=false<BR />enableHttpConnection=false<BR />sccsoidr(root):/sbin/init.d:# cat /var/opt/wbem/cimserver_planned.conf<BR />########################################################################<BR />## ##<BR />## CIM Server configuration file ##<BR />## ##<BR />########################################################################<BR /><BR />########################################################################<BR /># #<BR /># The configuration in this file is loaded by the CIM Server at #<BR /># start-up. This file is updated by the CIM Server when the #<BR /># configuration changes. #<BR /># #<BR /># Do not edit this file directly. Instead, use the cimconfig command #<BR /># to update the CIM Server configuration. #<BR /># #<BR />########################################################################<BR /><BR />enableSubscriptionsForNonprivilegedUsers=true<BR />enableNamespaceAuthorization=true<BR />sccsoidr(root):/sbin/init.d:# cat /var/opt/wbem/cimserver_current.conf<BR />########################################################################<BR />## ##<BR />## CIM Server configuration file ##<BR />## ##<BR />########################################################################<BR /><BR />########################################################################<BR /># #<BR /># The configuration in this file is loaded by the CIM Server at #<BR /># start-up. This file is updated by the CIM Server when the #<BR /># configuration changes. #<BR /># #<BR /># Do not edit this file directly. Instead, use the cimconfig command #<BR /># to update the CIM Server configuration. #<BR /># #<BR />########################################################################<BR /><BR />enableSubscriptionsForNonprivilegedUsers=true<BR />enableNamespaceAuthorization=true<BR />sccsoidr(root):/sbin/init.d:# Wed, 29 Oct 2008 14:36:50 GMT https://community.hpe.com/t5/insight-remote-support/webes-configuration-on-hp-ux-11-11/m-p/4296407#M1582 Kennedy G. Doss 2008-10-29T14:36:50Z https://community.hpe.com/t5/insight-remote-support/webes-configuration-on-hp-ux-11-11/m-p/4296408#M1583 <BR />Try this again:<BR />cimconfig -s enableSubscriptionsForNonprivilegedUsers=false -p<BR /><BR />You should see:<BR />Planned value for the property enableSubscriptionsForNonprivilegedUsers is set to "false" in CIMServer.<BR /><BR />Run: cimconfig -l -p to check, then stop/start cimserver.<BR /><BR />Remember -c is current, -p is planned.<BR /> Thu, 30 Oct 2008 11:54:50 GMT https://community.hpe.com/t5/insight-remote-support/webes-configuration-on-hp-ux-11-11/m-p/4296408#M1583 Liem Nguyen 2008-10-30T11:54:50Z