https://community.hpe.com/t5/insight-remote-support/serviceguard-cluster-not-detected/m-p/4510492#M2329 Sorry, I have no idea what the problem could be. (Only about half of our SG-Clusters get discovered)<BR /><BR />Just FYI, another piece of software is the SGWBEMProviders... maybe that needs to be updated. Fri, 09 Oct 2009 07:25:57 GMT Michael Leu 2009-10-09T07:25:57Z https://community.hpe.com/t5/insight-remote-support/serviceguard-cluster-not-detected/m-p/4510491#M2328 Hello, all. I am having a bit of trouble with discovery of ServiceGuard by our Insight Manager Server running 5.3 SP1.<BR /><BR />The server I am discovering is a BL860c running HP-UX 11.31 and ServiceGuard 11.18. It is a the passive member of a two node cluster which is available and running one package.<BR /><BR />While running the discover from the SIM server, everything goes fine except it is unable to discover the cluster for some reason. I am able to pull the cluster information up in the System Management Homepage for the server without any problem.<BR /><BR />I tried installing ServiceGuard Manager on the host I am discovering thinking that might be the problem, but it isn't. It won't even let me pull up the SG Manager because I am running SG 11.18 and it says that 11.18 was released after 5.02 of SG Manager and that I need to use the SMH based SG Manager. Fine, whatever.<BR /><BR />I have seen that I probably need to install SG Manager on the SIM server. Is this my problem? If not, what is?<BR /><BR />Thank you!<BR /><BR />Running SSH Protocol identification.<BR />The system supports SSH protocol<BR />Running SSH Identification.<BR />This system passed the ssh authentication; it has a valid ssh credential<BR />OS Name is identified by other identifier; continue to run other commands<BR />Running Storage identification.<BR />This system has some storage related information, additional storage systems may be added.<BR />This system has some storage related information, additional storage systems may be added.<BR />Storage identification completed.<BR />Running HP Service Guard Identification.<BR />The system is not part of HP Service Guard cluster<BR />Running SNMP Subtypes identification<BR />No additional subtypes found from SNMP<BR /><BR /><BR /> Thu, 08 Oct 2009 12:53:56 GMT https://community.hpe.com/t5/insight-remote-support/serviceguard-cluster-not-detected/m-p/4510491#M2328 No idea what I'm doing 2009-10-08T12:53:56Z https://community.hpe.com/t5/insight-remote-support/serviceguard-cluster-not-detected/m-p/4510492#M2329 Sorry, I have no idea what the problem could be. (Only about half of our SG-Clusters get discovered)<BR /><BR />Just FYI, another piece of software is the SGWBEMProviders... maybe that needs to be updated. Fri, 09 Oct 2009 07:25:57 GMT https://community.hpe.com/t5/insight-remote-support/serviceguard-cluster-not-detected/m-p/4510492#M2329 Michael Leu 2009-10-09T07:25:57Z