https://community.hpe.com/t5/insight-remote-support/questions-about-snmp-configuration-in-psp-8-20-8-30-8-60/m-p/4774290#M3235 I have a customer who has asked some questions about how the SNMP service is configured to work on the HP PSP<BR /><BR />1. Where will the PSP binary/script (which will actually send the SNMP trap message) look for the snmpd.conf file (to figure out the trap community and destination)? Is there any difference between PSP8.20/8.30/8.60?<BR />2. Is there any log file which has the record about the trap message sent?<BR />3. Could you confirm if PSP will ONLY send trap message upon hardware failure (but not other situations like server reboot, enclosure/server/iLo firmware upgrade)?<BR /><BR />Thanks<BR /> Wed, 06 Apr 2011 06:06:22 GMT sam gigliuto_2 2011-04-06T06:06:22Z https://community.hpe.com/t5/insight-remote-support/questions-about-snmp-configuration-in-psp-8-20-8-30-8-60/m-p/4774290#M3235 I have a customer who has asked some questions about how the SNMP service is configured to work on the HP PSP<BR /><BR />1. Where will the PSP binary/script (which will actually send the SNMP trap message) look for the snmpd.conf file (to figure out the trap community and destination)? Is there any difference between PSP8.20/8.30/8.60?<BR />2. Is there any log file which has the record about the trap message sent?<BR />3. Could you confirm if PSP will ONLY send trap message upon hardware failure (but not other situations like server reboot, enclosure/server/iLo firmware upgrade)?<BR /><BR />Thanks<BR /> Wed, 06 Apr 2011 06:06:22 GMT https://community.hpe.com/t5/insight-remote-support/questions-about-snmp-configuration-in-psp-8-20-8-30-8-60/m-p/4774290#M3235 sam gigliuto_2 2011-04-06T06:06:22Z