topic Re: MAD - ISEE daemon start issues... in Insight Remote Support

MAD - ISEE daemon start issues...

Senthil Kumar .A_1 — Fri, 17 Nov 2006 01:28:33 GMT

Hi experts,

When the HPUX system starts up, the rc throws the following error...

starting the Motive Assistant Daemon
/opt/hpservices/bin/mad
EXIT CODE: 1
"/sbin/rc2.d/S605hpservices start" FAILED

But when we check the daemon using, ps -ef , we indeed find the daemon running. Well though it functions fine, we would like to trace with what return code did the daemon exactly start with. Is there a debug mode that can be turned on or is there any other alternatives...

Advance thanks for you time.....

Re: MAD - ISEE daemon start issues...

rariasn — Fri, 17 Nov 2006 04:41:55 GMT

Hi Senthil,

/sbin/rc2.d/S605hpservices option

comlog {0-3} - change the comm subsystem logging. The log levels are
defined as follows:
0 = Turn off MSG_DEBUGGING, HEADER_DEBUGGING, KEEP_MAP_RESULTS
1 = Turn on MSG_DEBUGGING
2 = Turn on HEADER_DEBUGGING
3 = Turn on KEEP_MAP_RESULTS
halt - stop the daemon (supress all output)
log {1-5} - change the mad daemon log level. If a negative value is
specified, revert to the default level
restart - stop, then start deamon
start - start the daemon
status - determine if deamon is up or down
stop - stop the daemon

rgs,

Re: MAD - ISEE daemon start issues...

Liem Nguyen — Mon, 20 Nov 2006 11:22:00 GMT

Hi,

Can you provide the following info:

1. swlist -l product | grep -i isee
2. ps -ef | grep mad
3. /sbin/init.d/hpservices stop
4. /sbin/init.d/hpservices start
5. A copy of /etc/rc.config.d/hpservices.conf

Thanks,

Re: MAD - ISEE daemon start issues...

Senthil Kumar .A_1 — Thu, 26 Apr 2007 21:03:45 GMT

This question was posed behalf of my friend. He hasn't got back to me yet about its resolution.