https://community.hpe.com/t5/insight-remote-support/disk-thresholds/m-p/5184348#M3955 I am trying to set disk thresholds on a server from SIM and I get the error "Could not set the disk threshold, the agent did not accept the request."<BR /><BR />I have checked and SIM is receiving SNMP traps from the server, I have also did a config/repair agents and let SIM create the read_write string on the server but I still cannot set the treshold. <BR /><BR />SIM 5.3 and the server is running 8.26 management agents. <BR /><BR />Any advice would be apperciated. <BR /><BR />Thanks,<BR />Joe Mon, 29 Jun 2009 20:29:12 GMT Joe Vogelsong 2009-06-29T20:29:12Z https://community.hpe.com/t5/insight-remote-support/disk-thresholds/m-p/5184348#M3955 I am trying to set disk thresholds on a server from SIM and I get the error "Could not set the disk threshold, the agent did not accept the request."<BR /><BR />I have checked and SIM is receiving SNMP traps from the server, I have also did a config/repair agents and let SIM create the read_write string on the server but I still cannot set the treshold. <BR /><BR />SIM 5.3 and the server is running 8.26 management agents. <BR /><BR />Any advice would be apperciated. <BR /><BR />Thanks,<BR />Joe Mon, 29 Jun 2009 20:29:12 GMT https://community.hpe.com/t5/insight-remote-support/disk-thresholds/m-p/5184348#M3955 Joe Vogelsong 2009-06-29T20:29:12Z https://community.hpe.com/t5/insight-remote-support/disk-thresholds/m-p/5184349#M3956 I was able to reslove this by un-installing the WBEM providers on the server. <BR /><BR />Disk thresholds are being set and the SMH is showing all system info like OS where it wasn't before. Wed, 01 Jul 2009 14:52:40 GMT https://community.hpe.com/t5/insight-remote-support/disk-thresholds/m-p/5184349#M3956 Joe Vogelsong 2009-07-01T14:52:40Z