topic Re: MONITORING LINUX SERVERS with HP IRS 7.0.8 in Insight Remote Support

MONITORING LINUX SERVERS with HP IRS 7.0.8

kherveric — Tue, 01 Jul 2014 12:59:38 GMT

Hello,

I've installed HP IRS 7.0.8 on our LAN and i can monitored Windows Servers and Storage. But the issue is that i can't enable all linux servers . SNMP is already activated on linux servers and all are monitored with nagios. when i launch the discovery through the same community i can see linux servers in IRS Console but i c'ant enable them. i've already put IRS servers as snmp trap destination with trapsink in linux snmpd.conf.

PS: i can't install HP SPP on linux servers because my manager don't want that

What can I do?

Kindly

Re: MONITORING LINUX SERVERS with HP IRS 7.0.8

toddg1 — Mon, 07 Jul 2014 18:14:13 GMT

kherveric,

SPP is a prerequisite for monitoring the devices.

Re: MONITORING LINUX SERVERS with HP IRS 7.0.8

Sharjeel Saleem — Fri, 12 Sep 2014 05:04:18 GMT

hi toddg1,

As per document, following componants from SPP is required to install only. PLease correct me if i am wrong.

hp-health-xx.rhel5.i386.rpm

hp-snmp-agents-xx.rhel5.i386.rpm

hpsmh-xx.rpm

hp-smh-templates-xx.all.noarch.rpm

Even after installing the above componants, we are still unable to register RHEL4 device.

PLease advice.

Regards,

Re: MONITORING LINUX SERVERS with HP IRS 7.0.8

toddg1 — Fri, 12 Sep 2014 12:45:37 GMT

At this stage, I would recommend that you open a support case with HP support to find out what is not working correctly in your setup.

Re: MONITORING LINUX SERVERS with HP IRS 7.0.8

Kayaturk — Sun, 11 Jan 2015 20:41:28 GMT

Hello,

After installing those hp-agents, run /sbin/hpsnmpconfig script and input values that script requests.

After then that, try to discover

Re: MONITORING LINUX SERVERS with HP IRS 7.0.8

danilovenancio — Thu, 06 Oct 2016 18:13:44 GMT

I have the same "issue" somebody can send me the setup of SNMPD? About servers linux, I can monit only iLO4 by RIBCL.

My personal e-mail is daniloaugustovenancio@gmail.com.

Thanks.

Re: MONITORING LINUX SERVERS with HP IRS 7.0.8

danilovenancio — Thu, 15 Dec 2016 10:22:39 GMT

Please you can send me a SNMPD.CONF done?

Thanks

Re: MONITORING LINUX SERVERS with HP IRS 7.0.8

SANJAY MUNDHRA — Fri, 16 Dec 2016 02:27:04 GMT

Hi,

USe the folowing example

dlmod cmaX /usr/lib64/libcmaX64.so
rocommunity snmp_hpcms
rocommunity snmp_hpcms localhost
rocommunity snmp_hpcms <IRS Server IP Address>
trapcommunity snmp_hpcms
trapsink <IRS Server IP Address> snmp_hpcms
trapsink localhost snmp_hpcms

Note: SNMP community used in the above example is snmp_hpcms, it may difefer for your site

Resatrt the SNMP services and HPE Agent services and sned a test trap using the command below:, need to have the SNMP_Utils RPM install for the snmp test trap to work.

snmptrap -v1 -c <snmp read community string> <CMS IP address> .1.3.6.1.4.1.232 <Linux server address> 6 11003 1234 .1.3.6.1.2.1.1.5.0 s test .1.3.6.1.4.1.232.11.2.11.1.0 i 0 .1.3.6.1.4.1.232.11.2.8.1.0 s "SNMP test trap from TEST machine"

Regards,

Sanjay