topic Re: SNMP Configuration Status = Misconfigured in Insight Remote Support

SNMP Configuration Status = Misconfigured

Tinux — Wed, 15 Mar 2017 14:50:38 GMT

I'am setting op HPE IRS to monitor some Proliant servers and a StoreVirtual SAN.

However: when I set snmp from CMC, I get "SNMP Configuration Status = Misconfigured" alarms for every storage node

When I check SNMP per node from the StoreVirtual CLI shell, all settings are there !!!

But when I have CMC send a Test Trap, only a of couple nodes actually send a trap, even when CMC states that SNMP is misconfigures on that node

The only thing that clears the alarm is: disable SNMP !!!

Please help, I'am getting pretty desparate.

Torsten. — Wed, 15 Mar 2017 15:07:06 GMT

You should review the chapter about StoreVirtual in the Insight RS "Monitored Devices Configuration Guide".

Tinux — Wed, 15 Mar 2017 15:14:03 GMT

I did and followed every step, but still I end up with all nodes complaining that SNMP is misconfigured.

I also installed a MIB browser on the managing/monitoring host., but every query I try on a node I get no response.

All nodes have just been upgraded to the latest Lefthand OS

This is the reply from the CLI getSnmpInfo:

RESPONSE
result 0
processingTime 437
name CliqSuccess
description Operation succeeded.

SNMPSERVICEPOLICY
started true
location
contact

SNMPNOTIFICATIONPOLICY
verbosity verbose
alertOnWarning true
alertOnInfo false
alertOnCritical true

SNMPCOMMUNITYSTRING
ip-hostname Default
communityString public

SNMPCOMMUNITYSTRING
ipsubnet 192.168.13.60
ipmask 255.255.255.255
communityString public

SNMPTRAPTARGET
version 1
ipAddress 192.168.13.60
communityString public

Torsten. — Wed, 15 Mar 2017 19:06:01 GMT

Consider to ask your question here