New Setup Devices Issue

musc_county — Wed, 22 Nov 2017 16:58:02 GMT

We have installed Insight Remote Support and have added devices, but some servers are showing 1 or more red X's even though we have added, or tested, the correct credentials for SNMP (v1 or v2), iLO, WMI, etc. The devices are under warranty and meet the Generation requirements. Suggestions on where to find troubleshooting suggestions? Is there tech support for this or is this a use at your own risk product? Thank you.

Re: New Setup Devices Issue

SANJAY MUNDHRA — Thu, 23 Nov 2017 02:00:06 GMT

Hi,

You may need to click on the Devices --> Monitoring and Collections to check why the devices are shoing Red. If the protocol has been Monitoring Protocol has been configured correctly then you may need to check the protocol used for collections, as this can be different as comared to the Monitoring protocol for some devices such as SAN Swicthes etc.

You can refer the IRS Managed Device Configuration guide for more details on how to discover the servers and the various protocols needed - https://support.hpe.com/hpsc/doc/public/display?docId=a00023073en_us

Other good IRS documentations are available at http://h17007.www1.hpe.com/us/en/enterprise/servers/solutions/info-library/index.aspx?cat=HP_Insight_Remote_Support#.WhYp4WYUmuU

As regards getting support, you can log a case with with HPE IRS Support team using the serian number of one of the managed device under active warranty/suport with HPE. HPE rovides complimentery support for IRS software.

Cheers,

Sanjay

topic New Setup Devices Issue in Insight Remote Support

New Setup Devices Issue

Re: New Setup Devices Issue