https://community.hpe.com/t5/insight-remote-support/isee/m-p/3799537#M815 There are things you can check, for example, verify that the mad (motive assistant daemon) process is running. Instructions as to how to do this are platform specific, so please tell me the platform on which you installed the ISEE A.03.95 Client.<BR /><BR />Also did you have any issues configuring the ISEE Client, e.g., failure during the Client entitlement phase?<BR /><BR />Take care,<BR />frank Sun, 04 Jun 2006 07:13:53 GMT Frank Alden Smith 2006-06-04T07:13:53Z https://community.hpe.com/t5/insight-remote-support/isee/m-p/3799536#M814 Following an install of of 3.95 ISEE client software, I am unable to connect from any pc (including the SPOP) any of 4 clients using the following command: http://<CLIENT ip="">:5060/start.html<BR /><BR />Client says 5060 is open between SPOP and client. Are there some things I can check before going back to the customer and saying it's port 5060?<BR /><BR /></CLIENT> Fri, 02 Jun 2006 12:28:36 GMT https://community.hpe.com/t5/insight-remote-support/isee/m-p/3799536#M814 J osborn 2006-06-02T12:28:36Z https://community.hpe.com/t5/insight-remote-support/isee/m-p/3799537#M815 There are things you can check, for example, verify that the mad (motive assistant daemon) process is running. Instructions as to how to do this are platform specific, so please tell me the platform on which you installed the ISEE A.03.95 Client.<BR /><BR />Also did you have any issues configuring the ISEE Client, e.g., failure during the Client entitlement phase?<BR /><BR />Take care,<BR />frank Sun, 04 Jun 2006 07:13:53 GMT https://community.hpe.com/t5/insight-remote-support/isee/m-p/3799537#M815 Frank Alden Smith 2006-06-04T07:13:53Z