https://community.hpe.com/t5/insight-remote-support/osem-1-4-and-c-seires-switches/m-p/3878145#M909 Hello<BR /><BR />Is there anyone who has succesfully setup osem 1.4 to receive snmp traps from cisco (SAN) switches ?<BR /><BR />We have tried this on our SPOP, added a C/series switch as a managed system, and then generated snpm traps from the switch, but osem doesnt seem to receive the traps.<BR /><BR />We have verified that the snmp´s events from the switch are received on our spop.<BR /><BR /><BR /><BR /> Wed, 11 Oct 2006 04:04:14 GMT jambond 2006-10-11T04:04:14Z https://community.hpe.com/t5/insight-remote-support/osem-1-4-and-c-seires-switches/m-p/3878145#M909 Hello<BR /><BR />Is there anyone who has succesfully setup osem 1.4 to receive snmp traps from cisco (SAN) switches ?<BR /><BR />We have tried this on our SPOP, added a C/series switch as a managed system, and then generated snpm traps from the switch, but osem doesnt seem to receive the traps.<BR /><BR />We have verified that the snmp´s events from the switch are received on our spop.<BR /><BR /><BR /><BR /> Wed, 11 Oct 2006 04:04:14 GMT https://community.hpe.com/t5/insight-remote-support/osem-1-4-and-c-seires-switches/m-p/3878145#M909 jambond 2006-10-11T04:04:14Z https://community.hpe.com/t5/insight-remote-support/osem-1-4-and-c-seires-switches/m-p/3878146#M910 Can you tell a bit more about the configuration? <BR />what is connected to what?<BR />Can you tell how you have set snmp?<BR /><BR />Is the trap destination of the switch pointing to a seperate OSEM server? Thu, 12 Oct 2006 06:47:04 GMT https://community.hpe.com/t5/insight-remote-support/osem-1-4-and-c-seires-switches/m-p/3878146#M910 A. van Berk 2006-10-12T06:47:04Z